Translate

Friday, March 1, 2013

Field Strength Calculator One: Update 1.0052

The latest update to Field Strength Calculator One has fixed an occasional looping bug which occured at extreme distances (~5000 miles or greater) and added three new calculations figures. The FCC's 10 KHz, 20 KHz, and 30 KHz allowable interference contour levels and expected distances for these levels are now part of the calculations results.

For those new to Field Strength Calculator One, the program returns expected received field strength in millivolts per meter and dBu (also known as dBµV/m), based on ground conductivity, earth dielectric and several other input constants. It also displays the distance to the radio horizon and the signal path loss in dB, along with several more technical parameters. The resulting output of Field Strength Calculator One should be accurate in most cases to a couple of percent in the longwave and mediumwave bands. It compares favorably to ITU program GRWAVE and currently available FCC Ground Wave Conductivity graphs.

For further information on how field strength is calculated see the Field Strength Calculations Series previously published on RADIO-TIMETRAVELLER.

DOWNLOAD

To download, see the link at the top of the right sidebar under LATEST PROGRAMS. The sidebar at the top right will have the most current link in case the program is updated. The link will change in the case of an update, so I would avoid copying and pasting it into a forum or other web page. Come to the main page of this blog instead.

INSTALL

Install is simple. Download the .zip file and unzip. Click on the FieldStrengthCalculatorOne.exe file to run. This program makes no registry changes and saves no data to your hard drive. It has been developed and tested in Windows 7. It should work fine in Windows Vista and XP environments, and Windows 8. It is written in the old standby Visual Basic 6.

Included in the .zip is a readme.txt file. Be sure to have a look.

Click image to enlarge.


No comments: